Chevrolet Malibu XL 2018 24C32 odomter correction With CG100 programmer

Chevrolet Malibu XL 2018 with BCM No. 13514637 and module chip 24C32. Used CG100 programmer to read and write mileage successfully. This post share the whole procedure with lots images.

Car model: Chevrolet Malibu

Year: 2018

BCM number: 13514637

Module chip: 24C32

Procedure:

Part 1: Check the specific car info.

Part 2: Record the current mileage value.

Part 3: Power off the vehicle, remove the BCM module and disassemble it.

Part 4: Confirm the BCM storage chip.

Part 5: Open CG100 programmer, enter the corresponding software.

Part 6: Dismantle the chip 24C32, power on the CG100 programmer, follow the software instructions to operate, if any problem, please contact at email Sales@OBDexpress.co.uk for help.

Part 7: Weld the chip 24C32 back to the BCM, install the BCM back to the car, start the car, it display 7372KM, the mileage correction succeed.

Chevrolet Malibu XL 2018 24C32 odometer  correction  with CG100 programmer ,done!

http://blog.obdexpress.co.uk/2019/04/26/chevrolet-malibu-mileage-correction-via-cg100/

How To Use CG100 Change Mileage For Buick GL8 2018 24C32

      Buick GL8 2018 24C32 mileage program with CG100 programmer perfectly. this post share the whole procedure.

Car model: Buick GL8 2018

Chip: 24C32

Tool to use:

CG100 programmer

EEPROM adapter

Guide:

Check the specific Buick car model and year.

Record the current mileage.

Power off the vehicle the vehicle, remove the BCM, confirm the eeprom chip.

Open the CG100 software, enter the corresponding operation menu, follow the software description to choose the adapter EEPROM.

Click on”Mileage (8 feet)” to enter

Selet “Buick”to enter

if the CG100 software has no GL8 model, please try the other model which has as the same GL18, for example, Encore which chip is also 24C32

Dismantle the chip 24C32, power on CG100, follow the software instructions to operate, if any problem, please contact at email Sales@OBDexpress.co.uk for assistance.

Click on “Start”(In Chinese “开始”)

Click Read(In Chinese”读取”)

CG100 is working, please do not disturb.

After Reading succeed(In Chinese”读取成功”),Click”OK”,and save (in Chinese”保存”)the original data

If the mileage that CG100 readout is close the real value, click”Adjust mileage” (In Chinese”修改里程”)and input the new
mileage, then click on “YES”(In Chinese”确定”). Otherwise, please contact CG Company

Click”Write”(In Chinese”写入”), and wait for monent

Mileage reading and writing success, install the BCM back to Buick GL8, power on the car, verify it is working.

Done.

Big thanks to CG100 programmer and EEPROM adapter.

Who Like This Article Also Viewed:

CG100 Prog III 3.9.2 for sale, airbag software download, car list (2)

Why should you buy a CG100 programmer? (2)

CG100 PROG III v4.0.1.0 Software download (2)

CG100 V5.0.3 update free for Mileage(8 Pin) (2)

Update!OBDSTAR X300M v31.00 Volvo odometer correction car list: (1)