How to do BMW F Series Coding by CGDI BMW?

Obd2eshop will show you step by step guide on how to do BMW F Series Coding by CGDI BMW in this post.

Here you go:

Connect CGDI Prog BMW to the car via OBD
Click on BMW F Series Coding

This feature requires networking, please ensure that the network is normal.
Click on Read ECU info

ECU information read successfully. Now select 3. FEM_BODY

Choose Backup coding

“Whether to backup coding data”  Choose Yes

Backup coding successfully. You can see the file location here

Click on Coding

Coding is successful!


http://blog.obd2eshop.com/bmw-f-series-coding-by-cgdi-bmw/

BMW DME ISN code read: AT-200 VS CGDI BMW

BMW DME ISN code reader tools advice: AT-200 + CGDI BMW

1. AT200

Can read BMW DME ISN code by OBD for MSV90 MSD85 MSD87 MSD85.2 MSD87.2, B48
AT200 also support BMW ECU Data reading, writing and clone.

2. CGDI BMW

Can read BMW DME ISN code by OBD for N20, N55, N46, MSV80, MSD80, MSD85

Seeing is believing, here comes operation videos:

1. First come AT-200 reads BMW DME ISN Code.

1). How to use AT-200 to DME MSV90 ISN Code?




2). How to use AT-200 to DME MSD87.2 ISN Code?

3). How to use AT-200 to Read DME MSD85 ISN Code?

 

2. Then come AT-200 reads BMW DME ISN Code:
3. How To Use CGDI BMW to Read DME MSV80 ISN code?

2. How To Use CGDI BMW to Read N55 DME ISN code?

Conclusion:
AT-200 is not the same as CGDI BMW in BMW DME ISN code reading, AT-200 can do what CGDI BMW can't do.

Thanks.

http://blog.obdexpress.co.uk/2019/05/24/bmw-dme-isn-code-read-at-200-vs-cgdi-bmw/

(Solved)Write ELV Error,Makesure ELV Is Not Activated

A user used CGDI MB and ELV simulator (White), get the errors:
1: Write ELV error, make sure ELV is not activated.

2. This is the old version of the simulator, please contact the after-sales to replace the new version for free...

Possible reason:
K-line has bad clip

Solution:
Follow the below instruction to operate.

Connect CGDI MB tool to the vehicle via the OBD port, then read the EIS data.


Click on "Computer password" to collect the data.

The collection process will not be described one by one, upload data, successfully query the password and copy the key password.

Click on "EIS" and paste the key password.

Save the data in the default file name.

Put on the ELV simulator and clip the K-line.


Click "ELV", enter "simulator".

Read the Simulator and the related information will be displayed, take 204 ELV simulator data for example.

Erase Simulator success!

Load the EIS data that was saved just now and check whether the key password is correct.

Click 'write' button.

Write ELV successfully, please insert key into EIS and switch ignition on to activate.

Read simulator again, you can see it is in the "activated" status, match successfully!


Done.

CGDI MB and ELV simulator tech support is offered by www.obd2eshop.com

CGMB
http://www.obd2eshop.com/wholesale/cgdi-prog-benz-key-programmer.html
ELV simulator
http://www.obd2eshop.com/wholesale/cddi-mb-elv-simulator.html

Source:
http://blog.obd2eshop.com/solution-to-cgmb-write-elv-error/

How to use CG100 Pro III to repair airbag for Land Rover Aurora 2014?

Car type: 2014 Land Rover Aurora
Airbag No: DK62-14D374-AG
Tool Option: CG100 PROG III Airbag Restore Devices

Step-by-step procedure:

1. Check the vehicle.

2. The airbag lights on all the time.

3. Access professional decoder detection and clear the DTC.

4. Disassemble the car, find the airbag computer board, confirm the chip.

5. Open the software, enter the corresponding operation interface, find the physical wiring diagram.

6. Perform physical wiring in a no-current environment and confirm that it is correct before

powering on. After reading the data, please save the original data! If the software supports
automatic repair, please repair it at the prompt of the software; if the software does not support
repair temporarily, please select the custom operation the first time consult the manufacturer's
technical staff ( E-Mail:Sales@OBD2eShop.com).


(Note: Please do not touch any cables when it is reading.)

7. After the repair is completed, please put the airbag computer board back to car. Connect Land Rover special

inspection SDD detection, it did not show any DTC.

8. The airbag light is off.

9. The airbag repaired successfully by CG100 PRO III.

http://blog.obd2eshop.com/cg100-pro-iii-to-repair-airbag-for-land-rover/