BMW E-series coding & programming: CGDI BMW VS BMW ICOM

CGDI BMW update in July, 2019:

1. Adds BMW E series programming and coding.
2. Adds BMW diagnosis function, including BMW E series, F series, G series trouble codes reading and clearing.

Welfare:
If you have any of CG100, CGPRO, CGDI MB, you just provide the serial number for free trial.

BMW E-series coding & programming: CGDI BMW VS BMW ICOM

1. Easy to use. As long as you are qualified with corresponding vehicle maintenance knowledge, CGDI BMW does not have high requirements for the user's professional skills and English level.

2. Cheap. CGDI BMW is cheaper than BMW ICOM (clone and original).

BMW ICOM clone & original are able to diagnose, program and code BMW E-series models at higher price (clone: about 400eur).
Besides, BMW ICOM has some requirements for the user's operating skills during installation, therefore some users will choose a hard disk with pre-installed software and be charged.

3. Menu-driven & automatic operation instead of manual operation, which save much time.

How to use CGDI BMW to diagnose BMW 3- series E93?

1. Click on "BMW diagnosis".

2. Whether to scan vehicle quickly.

Press "Yes" and CGDI BMW software will scan the BMW in 30 seconds.
Press "No" and CGDI BMW will scan the BMW all systems and take about 3 minutes.

3. After clicking on "No".

4. Pops up the BMW information.

You have options : Read fault codes, clear fault codes, Clear all codes, Help, back.
All are menu-driven operation.
And the left corner will show the working status.


5.Back to select "scan vehicle quickly".
And you will see all trouble codes are cleared, and all are normal.


CGDI BMW offers technical service. (http://www.obdexpress.co.uk)

Source:

http://www.obdexpress.co.uk/service/diagnose-bmw-3-series-e93-with-cgdi-bmw-36849.html

BMW DME ISN code read: AT-200 VS CGDI BMW

BMW DME ISN code reader tools advice: AT-200 + CGDI BMW

1. AT200

Can read BMW DME ISN code by OBD for MSV90 MSD85 MSD87 MSD85.2 MSD87.2, B48
AT200 also support BMW ECU Data reading, writing and clone.

2. CGDI BMW

Can read BMW DME ISN code by OBD for N20, N55, N46, MSV80, MSD80, MSD85

Seeing is believing, here comes operation videos:

1. First come AT-200 reads BMW DME ISN Code.

1). How to use AT-200 to DME MSV90 ISN Code?




2). How to use AT-200 to DME MSD87.2 ISN Code?

3). How to use AT-200 to Read DME MSD85 ISN Code?

 

2. Then come AT-200 reads BMW DME ISN Code:
3. How To Use CGDI BMW to Read DME MSV80 ISN code?

2. How To Use CGDI BMW to Read N55 DME ISN code?

Conclusion:
AT-200 is not the same as CGDI BMW in BMW DME ISN code reading, AT-200 can do what CGDI BMW can't do.

Thanks.

http://blog.obdexpress.co.uk/2019/05/24/bmw-dme-isn-code-read-at-200-vs-cgdi-bmw/

CGDI BMW 2.5.0 update: BMW E/F/G series programming and coding OK

CGDI BMW 2.5.0 update
ttp://www.cg100iii.com/download/CGDI_V2.5.0_Setup.exe
Data: 01-10 -2019
Newly add BMW E F G series programming & coding etc.

1. Support BMW E series programming

Works on: E60/E61/E63/E64, E65/E66/E67/E68, E70/E71/E72,
E89/E81/E82/E84/E87/E88/E90/E91/E92/E93, R55/R56/R57/R58/R59/R60/R61 etc

Single-module programming: Support the modules communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc.

Doesn't support the modules that need Fiber Optic CAN bus and the other bus lines, such as: multimedia display, radio, car information computer etc.

2. BMW E series coding

Supported E series models:
E60/E61/E63/E64, E65/E66/E67/E68, E70/E71/E72, E89/E81/E82/E84/E87/E88/E90/E91/E92/E93, R55/R56/R57/R58/R59/R60/R61 etc.

Support the module communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc.

Functions: Coding, backup & coding, restore coding etc.
Can work as the same as ISTA-P, NCS-Expert tool and WinKFP.

3.BMW F series coding and programming works.
Supported models:
F001(F001,F002,F003,F004,F007,RR04,RR05,RR06)
F010(F005,F006,F010,F011,F012,F013,F018)
F020(F020,F021,F022,F023,F030,F031,F032,F033,F034,F035,F036,F080,F082,F083,F087,F088)
F025(F015,F016,F025,F026,F085,F086)
F056(F039,F045,F046,F047,F048,F049,F052,F054,F055,F056,F057,F060)

Support the module communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc.
Functions: Single -module programming, single-module coding, backup  & coding, restore coding.
Can work as the same as Esys, ISTA-P etc.

4. BMW G series coding and programming works.

Supported models:
G070(G070,G071)
I001(I001,I012,I015)
K001K010,K018,K019,K021,K022,K023,K032,K033,K034,        K035,K045,K046,K047,K048,K049,K050,K051,K052,K053,K054,K061,K067,K069,K080,K081,K082,K083,K084)
KE01(K017)
M013(M013)
KS01(K002,K003,K008,K009,K060)
S15A(F090,F097,F098,G001,G002,G011,G012,G013,G030,G031,G032,RR11,RR12,RR31)
S15C(G008,G038)

Functions: Single -module programming, single-module coding, backup coding, restore coding.
Can work as the same as Esys, ISTA-P etc.

5. For FEM /BDC key programming, add the two versions: 0000155E.018_120_010 and 00002419.081_010_020

6. F / G series programming: add the programming file swfk, flup, blup etc. Fix the problem that some module programming failure.

7. For CAS1 -CAS3+ key programming, add Rolls-Royce CAS1 and CAS2 key programming.

8. For BMW data modification, add CAS3+ and CAS4+ ISN encryption and decryption.

9. For Maserati Mileage Adjustment, add the "Save EEPROM data" function.

10. For BMW F series coding, fix the problem that the modules display incomplete.

www.obdexpress.co.uk

(Solved)CGDI BMW "21E1 FEM BDC version does not support "

Some BMW F series with FEM / BDC Immobilizer system has higher or lower firmware version, the user will get message "21E1 FEM BDC version does not support, please upgrade FEM BDC first " when using CGDI BMW to program key via OBD. then many users tend to think their FEM/BDC is not supported by CGDI BMW and miss the chance to earn money. In the following parts, I will show you how to solve this problem.

Solution provided by obdexpress.co.uk engineer:

1. Ensure the BMW has correct voltage, plug CGDI BMW to the OBD2 port of to BMW.

2. Click on "FEM / BDC key Match", you may get message "FEM/BDC version is not supported, please upgrade FEM/BDC first".

3. Turn on the ignition switch, open the door, click on "F /G series program".

Choose "2 . FEM _Body", then "Begin Program".

4. Turn on the ignition switch, open the door, click on "F /G series coding".

Choose "2 . FEM _Body", then "Coding".

5．Get prompt that all are fine, follow the on-screen message to operate.

Done.

CGDI BMW programmer tech support by http://blog.obdexpress.co.uk/2018/12/20/cgdi-bmw-21e1-fem-bdc-version-does-not-support-solution/